Roomba error 15 means an internal navigational error in your vacuum. It appears due to miscommunication with the iRobot home app or Home Base. Let’s see how you can fix Roomba Error 15.
Note: Error 15 and Charging Error 15 are two different issues. This guide is about Error 15.
Fix Roomba Error 15 in 7 Easy Steps
1. Press the “Clean” Button
Press the clean button located at the center of the device. You don’t have to hold the button; just press it once, and it will fix error 15.
2. Force Close the iRobot Home App
Error 15 is mostly displayed after the app encounters a problem. You can force-stop the app to fix error 15. Follow your device’s usual procedure to force close the Roomba app.
3. Reboot the Roomba
Rebooting e, 500, 600 (regular and WiFi-enabled), and WiFi-enabled 800 series
Press and hold the “Spot Clean” and “Home” buttons together for at least 10 seconds. Release the buttons when you hear a rebooting beep.
Rebooting 700, 800, 900 series
Press and hold the “Clean” button for at least 10 seconds. You will hear a beep indicating rebooting.
Rebooting i and s series
Press and hold the “Clean” button for 20 seconds. The ring light turns white and moves in a clockwise direction. When this light shuts off, it indicates that your vacuum is rebooted now. In s series, this light is around the bin lid. Wait for 1-2 minutes before turning on your Roomba again.
4. Revert “Smart Maps” to the Previous Version
After rebooting, if error 15 still appears, then you should try reverting your Smart maps. Your vacuum will work smoothly after you revert the map to its previous version. Your Roomba device is familiar with the previous map, making it easier to navigate.
You can revert your Roomba Smart Map to its previous version by following the below-mentioned steps.
Go to the history on the iRobot app
Check the clean maps report
Select your desired previous map
Click the overflow menu that is present in the top right corner
Select update smart maps
IRobot home maps
5. Delete the Existing Maps
If Roomba error 15 persists, there is a chance of error in the maps. So, to fix this issue, you can remap your home. Before remapping, you should delete the previous maps first. You can delete the maps in the following steps.
Go to the maps on the iRobot home app
Select the map from the app
Press three horizontal dots icon on the map
Click delete to remove the map
Remove all the maps one by one. Deleting the maps also removes the generic bugs and system glitches. Reset your Roomba device after deleting the maps.
6. Remap Your House
Remapping will allow your Roomba to understand and recognize your home layout again. You can remap your house in the following easy steps.
Place the Roomba in its home base.
Press the clean button.
Allow your Roomba to navigate your room.
After navigation, rename the new map. (You can rename a new map only in those Roomba models that have the “Smart Maps” option)
Continue these steps for your entire house or the areas your want Roomba to clean. Keep the doors open, wipe the floors and remove any obstacles that may hinder Roomba’s movement.https://www.youtube.com/embed/6k-6yOFTH54
7. Reset your Roomba to Factory Settings
Resetting works when everything else fails to remove error 15. Please note that resetting removes all the data from your vacuum cleaner.
Factory Reset by iRobot Home App
Go to settings in app.
Press factory reset/remove.
Do not close the app during the resetting process, connect Roomba and Home Base to same Wi-Fi network.
Factory Reset using buttons
For the s and i series: Press and hold the home, spot clean, and clean buttons until you see the light ring move in white.
For the j series: Remove the dust bin from the device. Press and hold the clean button for seven seconds. You will hear a tone. Once you hear that tone, press the “Clean” button again.
For e series: Press and hold the spot clean, home, and clean buttons for 20 seconds to factory reset s series Roomba models.
For 900 series: Press and hold the spot clean, dock, and clean buttons until the LED lights start illuminating.
For 600 and 800 series (WiFi enabled): Press and hold the spot clean, dock, and clean”buttons until you hear a beep.
O-Cedar Spin Mop is an amazing cleaning tool that effortlessly cleans hard-to-reach areas and different floors. This spin mop works practically well as the company claims to kill 99.9% of bacteria with water. Yet, you will still see some dirt on the floor. So, you might need some good cleaners that should be compatible with O-Cedar Spin Mop. This article discusses the most efficient and powerful commercial and homemade cleaners suitable for O-Cedar Spin Mop.
Commercial and Homemade Cleaners to Use with O Cedar Spin Mop
What cleaner to use with an O Cedar spin mop? It usually depends on the type of floor you have. To name a few, you can use Tide powder, Pine-Sol, Murphy’s Oil Soap, Fabuloso, OxiClean, Vinegar, dish soap, etc. Read this guide further if you want to know about these cleaners for your O-Cedar Spin Mop.
Trusted by customers, Tide Powder is an excellent cleaner. It sticks with the dirt particles and removes them entirely off the floor. You can use this powerful powder with O-Cedar Spin Mop by following the given steps.
One teaspoon of Tide Powder in a gallon of hot water will do the cleaning job. This solution will also keep your floor non-soapy and non-greasy.
You should wring the mop up to a point where it removes 90% of water. A damp mop will dry out the floor faster without damaging the wooden floor.
Tide is safe for various floors like linoleum, tiles, hardwood, vinyl, and laminate.
You can also use a microfiber cloth to dry out the floor faster after mopping.
Murphy’s Oil Soap is an environment-friendly option for wooden floors. It will also retain the shine of the wood. To get the best results, the company advises diluting it. This is to ensure a residue-free floor.
Use a quarter cup in a gallon of warm water for normal stains.
You can use a half cup of Murphy’s Oil Soap per gallon of warm water for heavy cleaning. Mix it properly!
Add this solution to the O-Cedar bucket, dip and wring your mop in the bucket and enjoy easy cleaning.
Don’t forget to use a microfiber cloth after mopping.
Pine-Sol is the EPA registered broad-spectrum disinfectant. It will kill 99.9% of common household bacteria. But, the acidic nature of Pine-Sol can damage the marble, waxed, unsealed, oiled, and worn-out wood. Some people can also be irritable due to the strong, pungent smell. Seek medical help in case of irritation.
Dilute a quarter cup of Pine-Sol in a gallon of warm water to use it with your O-Cedar Spin Mop.
Wring your mop well before cleaning your floor.
After cleaning with this solution, you can also use a damp microfiber mop to remove any leftover residues.
For tough stains and grease, use it directly on the spot with either a sponge or a brush.
Odoban is an excellent cleaner and an odor eliminator. It cleans your home and leaves a refreshing fragrance as well. You can also keep your carpets, bedding, and curtains fresh using Odoban.
You have to dilute 7 oz of this cleaning product in a gallon of water for floor cleaning and disinfection.
For odor elimination, use 22 oz of product in a gallon of water. It works pretty well with O-Cedar Spin Mop and cleans your floor thoroughly.
Powdered OxiClean is a versatile cleaner used for indoor and outdoor flooring. Water activates OxiClean to release its oxygen molecules. These oxygen molecules then work on stains and grime to remove them.
Mix two tablespoons of OxiClean in a gallon of hot water to clean stubborn stains. You have to wait for the molecules to work on stains.
With OxiClean, you have to mop twice. First, mop the floor with the solution. Wait for it to work.
Then, mop again with plain water. This ensures a clean floor.
OxiClean is best for hard surfaces like tiles and grout.
LA’s Totally Awesome Cleaner is a mixture of surfactant agents and water. This mixture cleans the stains and grease off the surface. It is cheap, non-toxic, and biodegradable, making it a good choice for cleaning floors. Moreover, it is safe to use on laminate floors as well.
Follow the dilution chart on the product for recommended usage. But for tough stains, you can increase the amount of the product. It varies with the stains.
After dilution, use this cleaner with O-Cedar Spin Mop to remove stains and grime from floors.
Bona hardwood floor cleaner is an EPA-approved environment-friendly product. The spray bottle makes it easy to use with your spin mop. Even a small amount of it will give you good results.
There is no need to make a solution. Spray the product directly on the floor and mop. Bona gives a residue-free finish to your hardwood.
Homemade Cleaners
1. Vinegar and Water
The simplest solution you can make using your kitchen products is vinegar and water. Vinegar has antibacterial properties due to its acidic pH. It is best for shiny surfaces like tiles and glass. If the smell of vinegar is irritating to you, add some essential oils to the solution.
The ratio of vinegar and water is not fixed. You can change it according to the surface and stains. But, a diluted solution of vinegar has a lower pH value which is good for surfaces that need pH-neutral cleaners. You can also add other cleaning agents like dish soap, rubbing alcohol, and lemons to the solution. This will increase the effectiveness of the solution.
Add diluted vinegar solution to the O-Cedar bucket and dip your O-Cedar Mop into it. Wring the mop well before using it to clean your floor.
Never use vinegar on the wood floor; it damages the wood.
2. Dish Soap and Water
We all use dish soaps to cut grease off the utensils. Dish soap is antibacterial and works well with the O-Cedar Spin Mop if appropriately used.
A few tablespoons of soap in a gallon of hot water will clean your tiles and vinyl. Mix it properly to avoid a slippery floor. Be safe! Mop your floor with this magical homemade cleaning solution for a thorough cleaning.
How to Maximize the Efficiency of Floor Cleaners with O-Cedar Spin Mop?
Use Warm Water
Hot water breaks down the particles of stains and helps in easy cleaning. Then microfibers of the mop trap the smaller particles more easily than, the larger ones. Hot water will also dissolve the product/cleaning agent effectively. This ensures a residue-free floor.
Use the Right Technique for Mopping
The right technique for mopping is important, especially for wood floors. It would help if you always mopped in the direction of wood grains to maintain the quality of the floor.
Always use an S-shaped pattern for mopping instead of back and forth motion. The back and forth motion will only move the dirt around instead of cleaning it.
Maintain the Quality of the Microfiber Mop-Head
The company recommends you replace the mop-head once every 3 months.
While cleaning the microfiber mop-head, do not use a fabric conditioner. The fabric conditioner will shrink the microfibers. This affects the absorption of moisture and cleaning.
Prep Your Surface Before Mopping
Sweep or vacuum your surface before mopping. Having a clean surface ensures a better result of mopping. Vacuuming will also get rid of pet hair. This step will save you from a lot of mess.https://www.youtube.com/embed/Tr0nk9_abTs
Final Thoughts
In this article, I have discussed homemade and commercial cleaners that you can use with the O-Cedar Spin Mop. These cleaners are practical and well-rated. Always check the manufacturer’s guide for the correct dilution of the cleaners to properly clean your floor.
Frequently Asked Questions
1. How to clean an O-Cedar Spin Mop head?
You can easily wash the mop-head of your O-Cedar Spin Mop using either your machine or hand. Avoid using harsh chemicals for mop head cleaning. Warm water will get the job done. Let it air dry. Avoid using bleach and fabric softeners.
2. Is it safe to use cleaners with the O-Cedar Spin Mop?
Any cleaner is safe to use with your spin mop unless it does not contain harsh chemicals. Harsh chemicals can damage the microfibers of O-Cedar Spin Mop.
3. What is the capacity of the O-Cedar Spin Mop’s bucket?
The bucket of O-Cedar Spin Mop can carry up to 2.5 gallons of water which is enough for daily cleaning.
4. How much should you wring the O-Cedar Spin Mop?
For tiles and ceramic, you can use the pedal of the O-Cedar bucket up to 4-5 times for mop wringing. For wood floors, use the pedal at least ten times.
Roomba charging error code 8 indicates the motor and filter have stopped working. It is a common charging error. The light ring around the clean button glows red, and error 8 appears on the vacuum. The error code is identified by your vacuum making 8 beeps.
How to Fix Roomba Charging Error 8?
Charging error 8 indicates a broken connection between battery and the terminals on the vacuum. Error 8 can also come up if the vacuum motor and filter are blocked. Follow the steps below to clean the filter and eliminate error 8.
Remove the dustbin from your vacuum cleaner.
Empty the bin and remove all the dust and debris inside.
Remove and clean the filter; follow the user manual to check the right cleaning process.
Insert the filter and the bin back.
Check if the error is eliminated.
If Roomba Charging Error 8 doesn’t disappear!
Check all the wires and the charging port.
Check the outlet you are using to charge the vacuum.
Check the circuit breaker.
Clean the contact points if they are dirty.
Check that you are using an authentic Roomba battery. Charging errors often happen with counterfeit batteries.
Always charge your Roomba at room temperature. Do not charge the battery in an extremely hot or cold environment.
Check that your vacuum is not charging near a heating vent, radiator, or baseboard heater.
Check home base. Sometimes Roomba may not charge due to a faulty or broken home base.
Can resetting fix Roomba Charging Error 8?
Yes. Resetting your Roomba can fix charging error 8. You can reset the machine by holding the spot/target button and the dock/home button together for 10 seconds. It is best to reset the unit when connected to the charger.
Roomba Charging Error 8 Causes
Improper house wiring
Loose power cord connection
You charge Roomba near the heating vent, radiator, or baseboard heater.
Damaged wire in the power cord
Damaged Roomba internal wiring or circuit board
How to fix Roomba error 8 that doesn’t appear due to charging?
If Roomba error 8 doesn’t appear due to charging issues, it indicates that your vacuum’s filter and motor have stopped working. To resolve this issue, you have to unclog the filter and clear the bin so that the motor and filter will work smoothly.
My Roomba is beeping continuously during charging; what does it mean?
The continuous beeping of Roomba during charging could have the following three reasons:
The battery is dead and not taking any charge
The charging circuit of iRobot isn’t detecting any charge current
Roomba is not plugged in properly to the charging point
A poorly working flush system in your toilet means trouble. The first thought in your mind is about replacing your toilet. But before you consider it, try cleaning your toilet’s siphon and rim jets.
In this article, we will walk you through a step-by-step guide on how to clean your toilet’s siphon and rim jets. As these terms are not common, check out a brief description before we move to our main discussion.
Toilet Siphon
A toilet siphon is an opening at the bottom of the toilet bowl. This is the point where most of the water enters the toilet bowl.
Toilet Rim Jets
The rim jets are located at the inner side of the toilet rim. The rims are designed to swirl water that cleans and rinses the bowl.
Together the siphon and the rims are responsible for emptying the toilet bowl contents after a flush. The water pressure also takes along deposits and minerals.
Step by Step Guide for Cleaning Toilet Siphon and Rim Jets
The toilet siphon and rim jets get clogged over time. The main reason behind this is improper cleaning and high mineral content in water. Most people focus more on cleaning the toilet bowl. A few clean rim jets, but the majority leaves siphon uncleaned. This is the reason why these two develop deposits and mold.
Here we will discuss how you can clean both.
Things Needed
Baking soda & Vinegar
Bucket
Funnel
Sponge
L-shaped Allen wrench
Gloves
Toilet Brush
Small mirror
Procedure
Step 1: Emptying Toilet Bowl and Tank
Flush your toilet to replace the bowl’s water with fresh water.
Turn off the water supply to your toilet and flush again.
Empty bowl water using a cup and absorbent sponge. Make sure you wear gloves and a face mask while doing it.
Remove the tank’s lid and use a sponge to remove the leftover water.
Step 2: Prepare Rim Jets
Use a mirror to locate rim jets under the rim.
Cover them with duct tape, so the cleaning liquid doesn’t flow in the bowl.
Step 3: Add Vinegar
Clogged rim jets and siphon mean that the toilet’s tank has mineral deposits on the inside. You must also clean the tank because a dirty tank will again block rim jets and siphon.
Clean the inside of the toilet tank using vinegar and a sponge. You may need to let the vinegar sit for a while in the tank if the stains are stubborn. Please don’t use bleach or corrosive cleaner in the toilet tank.
Proceed to the next step once the tank is clean.
Pour vinegar inside the overflow tube using a funnel. An overflow tube is a large tube inside the tank with a small water pipe connected to it.
Keep pouring vinegar inside this tube until the vinegar reaches the usual water level in your toilet bowl. Pouring large quantity is necessary to trap vinegar in rim jets and cover siphon.
Let the vinegar sit for at least a couple of hours; overnight is recommended if the rim jets are fully blocked.
Just a Pro Tip: Never use bleach, muriatic acid, or commercial cleaners with bleach while cleaning the toilet tank. These cleaners are corrosive and can damage rubber seals and valves inside the tank.
Step 4: Cleaning Rim Jets
Remove the duct tape; this will allow the trapped vinegar to flow in the bowl. You will see small particles in vinegar, confirming that the deposits have been broken,
Use the L-shaped Allen wrench to clean each rim jet. Rotate it, so any leftover deposits are removed. You can also turn a steel wire turned into L-shaped to clean the rim jets.
Flush the toilet to force the remaining vinegar in the tank into the toilet bowl. It will flush any leftover deposit inside the rim jets.DO NOT OPEN WATER.
Step 5: Add Baking Soda
Pour one cup of baking soda into the toilet bowl. It will start fizzing
Swish the mixture in the bowl with a toilet brush. Don’t forget to scrub the rim jets.
You will need a special brush for this task. Use Oxo’s brushas its design makes rim cleaning easy. Moreover, it has an oval-shaped grip for comfortable grip.
Step 6: Clean Toilet Tank
Use a sponge to clean the toilet tank.
Make sure you clean the bottom because water from the bottom also flows into the bowl.
Step 7: Clean Siphon
Use your fingers to clean the siphon jet (don’t forget your gloves).
Give it a good scrub with your finger. You can also use a soft scrubbing brush or steel wool to clean the siphon.
Step 8: Test
Turn on the water supply. Don’t place the tank lid as cleaning may disturb some settings in the tank.
Make sure the water fills to its normal level.
Flush the toilet to see how fast the water flows.
Repeat the process 2-3 times to ensure that the water level in the bowl reaches its normal level.
Siphon & Rim Jets Maintenance
Regular cleaning & maintenance of these items won’t force you to perform a deep clean. Here’s what you can do to ensure the good health of your toilet’s most crucial parts.
Keep rim jets clean; make it your habit to scrub the insides of the rim every time you clean the toilet.
Keep the toilet tank clean. Use cleaning tablets to ensure good health.
Use specialized hard water cleaners if you live in an area with hard water. Iron Out tablets are recommended for homes using well water or hard water.
Use liquid cleaners and a toilet brush to clean toilets for a deep clean. Deep cleaning unblocks rim jets and clears siphon.
Pour hot vinegar into the overflow tube after a couple of months. Don’t flush your toilet for a few hours when you do so.
Add some vinegar to the toilet bowl after 1-2 months to remove deposits along the siphon. Let it sit overnight.
Pour a bucket of slightly hot water into the toilet bowl to wash away any blockages in the toilet trap.
Why do toilet jets clog?
There are two main reasons behind clogged toilet jets and siphon.
Minerals in water and rust particles block these holes.
Homeowners rely on automatic cleaners and don’t scrub toilet rim and siphon as often as they should.
Can I use CLR to clean rim jets?
You can use any cleaner to clean rim jets as long as it doesn’t have bleach. CLR is highly effective in removing calcium, lime, and rust. It will pretty much give excellent results in rim jets cleaning.
The cleaning procedure will be the same as explained above, but CLRis costly compared to vinegar and baking soda. Moreover, these items are usually found in every home, so you won’t have to spend a dime using household items.
How can I remove bacteria and mold growth on siphon jets or rim jets?
You can use any toilet cleaner with bleach for this task. These cleaners kill the bacteria and mold spores and disinfect the toilet bowl for 2-3 weeks. You can add an automatic cleaning tablet or gel to keep the toilet bacteria and mold-free even longer.
Final Words
Cleaning siphon and rim jets is an easy but gross task. This is the reason many homeowners skip cleaning them during regular cleaning. However, cleaning them at least once a month is vital to ensure smooth functionality.
Composting is a win-win process for humans, plants, and the environment. It is critical to understand the 4 stages of composting to improve the results.
The 4 Stages of Composting
The 4 stages of composting are termed as
The Mesophilic Phase
The Thermophilic Phase
The Cooling Phase
The Curing Phase
Some researchers and composting specialists may list these phases with different names but the composting process remains the same.
The Mesophilic Phase
Bacteria combine with oxygen and water to start the process. Carbon dioxide and energy are produced as a result, and it is used for the reproduction and growth of bacteria. The remaining energy is given off as heat.
The temperature of the pile is raised due to the reproduction of bacteria, and the temperature can reach up to 111°F (44°C). The mesophilic bacteria work only well in this temperature range, and their growth and reproduction are limited as soon as the temperature starts to go up.
The first stage lasts for a week or so. The compost settles down during this stage and is ready for the next stage.
The Thermophilic Phase
The temperature goes up to 158°F (70°C) as the thermophilic organisms become active and produce a lot of heat during this phase. When the temperature reaches such a high point, the harmful bacteria die, the seeds from weeds are killed, and the pile starts to break down rapidly. You must keep the pile damp and make sure that there is sufficient air in the bin or pile. It acts as a catalyst during this process. Remember to turn the pile upside down once or twice in this stage, as it will ensure that oxygen reaches the center of the pile and all other areas as well.
The Cooling Phase
In the cooling stage, the pile cools down to the normal temperature. A lot of organic waste is still pending to be decomposed and become usable as compost. You may notice the color of the compost turning to be brown in portions, but it is not fully complete at this time.
The Curing Phase
The last and final stage is the curing phase. Depending upon the composition of your compost, it may take up to 6 months before the compost is finally ready to be used. You can check the condition of compost after 1-2 months; if it is brown, your compost is ready.
It is helpful to turn your compost after 15-20 days in the final stage. Please do not add more waste in the final stage as it can disturb the process.https://www.youtube.com/embed/f93hqpfGrbM
A dirty toilet is the most awful and ugly site in a bathroom. Everyone notices white film, black rings, and brown/black/red spots in the bowl. These spots and circles can be harmful and emit rotten odors.
Today, we will discuss the white stuff you see growing in the toilet bowl. This stuff appears like white threads hanging from toilet bowl. It often has a like hair-like growth in the toilet bowl.
This article will explain the following things
What is the white stuff in the toilet bowl?
Why does white mold grow in the toilet bowl?
How to treat (remove) it from the toilet bowl?
How to prevent the white stuff from growing in your toilet?
What is this White Stuff Growing in the Toilet Bowl?
The white hair-like stuff you notice in the toilet bowl is a fungus. It is commonly known as white mold. There are different types of fungus that cause white mold in the toilet. The appearance differs based on the type of mold in the toilet bowl.
The common types of fungus that cause white mold in the toilet are Penicillium, Cladosporium, and Fusarium. Penicillium causes white water mold in the toilet, Cladosporium is responsible for the white stuff, and Fusarium is the culprit behind white hair-like growth in the toilet bowl.
The white fungus is usually invisible initially unlike the black fungus. It demonstrates itself when it grows in size. Many times white fungus is overshadowed by black or colored fungi.
Why is White Stuff (Fungus) growing in Toilet Bowl?
Molds grow in dark and humid places. It also grows in places where filthy and stagnant water is present. White mold usually grows in swimming pools and hot tubs as water gets old or is not replaced.
You may also find white mold in attic walls, leather clothes, and basement walls.
You may be thinking why does white mold grow in a toilet bowl? It grows there because of dirty water. If the toilet is not flushed after every use or the washroom isn’t used for a long time. White mold also inhabits toilets that are not cleaned regularly.
Toilets that are not properly ventilated or don’t get sunlight also face mold problems.
Bathroom walls that stay wet for a long time can also act as a thriving ground for white mold. Molds often colonize other areas like the toilet tank and rim.
Mold thrives in sugary environments, but there is no proven link between urine supporting mold growth.
There are various other factors responsible for mold growth as discussed above. If these factors are taken care of, and you notice frequent mold growth, consult a physician. Sugar in your urine may be causing mold to grow in the toilet bowl.
Here’s the link to the Reddit thread that discusses how many people have faced mold problem due to sugar in the urine.
You can read user’s first-hand account here on how they come to know that mold made them test for diabetes. A couple of users even diagnosed diabetics in their kids due to frequent mold occurrences in washrooms.
How to treat White Stuff (Mold) from the toilet bowl?
The good part about removing mold from the toilet bowl is that you can use abrasive cleaners. Using abrasive cleaner or ones with bleach must be avoided when cleaning toilet tanks.
You will need long plastic gloves, a face mask, and safety goggles to avoid mold spores coming in contact with you. You will also need some toilet cleaning rags and a toilet cleaning brush. Oxo’s good grip brush is a good choice for mold and general cleanup.
You can remove the white stuff from the toilet bowl in several ways. Household cleaning items will do the needful most times, but you can also use commercial cleaning tablets or mold removers to get the work done quickly.
Method #1: Using Bleach& Vinegar to Remove Mold from the Toilet Bowl
Prepare the bathroom for action by turning on the fan and opening the windows for better ventilation.
Remove any toilet covers and bathroom rugs.
Flush the toilet or pour a bucket of water into the bowl to clear any gunk in the bowl.
Pour one cup of bleach into the toilet tank and one cup of vinegar into the toilet tank.
Use a toilet brush to mix the bleach with water in the bowl, and don’t forget to pour some bleach under the rim.
Close the lid for an hour or two.
Scrub the bowl with a cleaning brush or a rag while wearing gloves. Chlorine has a pungent odor, so don’t forget to wear a respirator and goggles.
Flush the toilet.
Wipe the seat and rim with a diluted (2 parts bleach and 10 parts water) solution. Wash them thoroughly with water to rinse any leftover bleach.
You can also scrub the toilet tank to remove any mold in it. This ensures that moldy water doesn’t enter the toilet bowl.
Method # 2: Using Commercial Cleaner to Remove White Stuff from Toilet Bowl
You can use a commercial cleaner to remove white stuff growing in your toilet bowl. It may be a bit costly, but this is hassle-free. Moreover, keeping a toilet cleaning tablet in the tank keeps the toilet clean as it dispenses some cleaning chemicals every time you flush.
Method # 3: Using Household Items to Remove White Stuff from Toilet Bowl
Hydrogen peroxide is a powerful mold killer. You will need gloves, a face mask, and safety goggles to work with it.
Borax effectively kills bacteria and mold spores. Borax is abrasive and must not be used in a toilet tank or on the toilet seat. It is safe for the toilet bowl. Borax is mixed in water to make a cleaning solution for mold.https://www.youtube.com/embed/NLK7tymQhSc
How to Prevent the White Stuff (White Mold) from Growing in your Toilet?
Mold grows in dark and humid places. It often grows in a toilet tank and is carried to the toilet bowl. Here are a few tips to help you keep mold away from toilet tanks.
Flush after every use.
Clean the toilet and bathroom once a week, even if it isn’t dirty. High-traffic washrooms must be cleaned twice a week.
Use cleaning tablets in the toilet tank to keep mild away.
Ensure you clean the toilet rim and seat to remove mold from hideouts.
Maintain air circulation in the washroom; open windows. Turn on the exhaust while using the toilet or showering.
You can also install a humidifier to check humidity levels in small, poorly ventilated bathrooms.
Check for leaks in the bathroom’s plumbing system. It is very difficult to detect a leak in your toilet tank. But, color dyes make it easy for you. Pour 2-3 drops of colored dye into the tank and see if the water in the toilet bowl gets colored after a few hours without flushing.
Add bleach to the toilet bowl if you plan on not using the bathroom for a long time.
Try to keep your bathroom dry as much as possible. Use floor and hand wipers to remove water from the floor and walls.
Spray a disinfectant in your bathroom after you are done cleaning the toilet tank and toilet bowl.
Dispose of absorbent and porous stuff like mats and rugs if they become moldy.
Final Words
The white stuff growing in your toilet bowl is white mold. The white mold can turn into black or brown later on. There are various ways to remove white mold from the toilet bowl. You can select the one you think is the easiest to work with.
Bona spray mops are quite popular among homeowners, but sometimes your Bona mop doesn’t spray. It can happen due to various reasons. Let’s read about the common causes and fixes for a Bona mop not spraying.
4 Common Reasons & Solutions for Bona Mop Not Spraying
Bona spray mop lets you control water quantity for surfaces that are not water-resistant, like laminate. What to do if Bona stops spraying altogether? Does it warrant professional inspection or mop replacement? Don’t worry; you can fix it yourself.
1. Bona Mop is Not Fully Assembled
Check that your Bona mop is correctly assembled. Bona mop not spraying problem usually happens if A & B poles are not properly locked. These poles will not separate when the mop is fully assembled. Here’s how you can assemble your Bona mop in the right way.
Take the refillable cleaner cartridge out of the mop.
Check if poles A & B are properly locked or not. If not, assemble A & B poles first and then push them down firmly, so both poles get properly locked. Check the trigger, there should be tension.
2. Leaking Cartridge
A leaking cartridge will allow the cleaning solution to escape while cleaning or when the mop is stored. It can be a design problem, improper storage, or a leak in the cartridge. Check user manual for the right storage method and inspect the cartridge for any damages. You may be able to repair it but it is better to replace a leaking cartridge.
3. Wear and Tear
Your Bona Mop may have lived its life. There is no guarantee that your Bona mop will last for a certain time. The wear and tear depends on how frequently you use your mop, cleaning style, storage, and upkeep.
The plastic parts on your mop can break after sometime. The trigger, poles, cleaning head undergo wear and tear with every use. There is not much you can do about it as repairing plastic is not a good idea. You will have to buy a new mop.
4. Faulty Spray Trigger
Some users report that the spray trigger gets jammed in older mops. You can’t clean anymore with a jammed trigger. The easiest way to fix this is remove the trigger cap and spray some WD-40 on it. Let WD-40 sit for some time so it works its way around. Place the trigger cap and see it it
Frequently Asked Questions
1. How to remove a bona mop cartridge?
Press the grey cartridge eject button and lift the cartridge straight up. Unscrew the white cap and pour your cleaner into the cartridge bottle. Screw the cap back on and place it back on your mop.
2. How to unlock the bona spray bottle?
Grab the bona spray bottle firmly and twist its top a quarter turn to remove. If it’s not removed this way, you might need to invest some force in turning the top of a bona spray bottle.
3. Why does a spray bottle stop working?
If your spray bottle is not working, there might be a blockage in the nozzle. Besides this, any damage in the piston seal or inner tube also hinders the spray from a spray bottle.
9 Reasons why Bissell 1413 isn’t Picking Items on Carpet
Problem 1: Holes or cracks in the vacuum hose
Solution: Inspect the hose for any cracks, holes, or kinks. Straighten out kinks and bents. You can use duct tape to patch up small holes, but bigger holes or multiple holes require hose replacement.https://www.youtube.com/embed/WxOjFRQJcVg
Problem 2: Incorrect height setting
Solution: Always focus on the height of the carpet and then adjust the power foot accordingly. You will find five height settings on the Bissell 1413 vacuum cleaner.
If you are using your vacuum on a plush carpet, the highest setting must be selected. For medium pile carpets, you can use the medium setting, and for bare floors or low pile carpets, the lowest height setting is recommended.
Problem 3: There is a problem with the drive belt. Either it is broken or worn out
Solution: It is recommended to regularly check the drive belt to ensure it is in good working condition. The vacuum fails to collect debris when the drive belt gets broken or worn out. The only solution for this problem is to replace the drive belt.
Problem 4: Dirty/clogged or old filters
Solution: Check both the pre-motor and post-motor filters and clean them. Replace if the filters are damaged.
When cleaning the filters, keep in mind that the black carbon filter is not washable. Also, you can’t wash the pleated post-motor filter.https://www.youtube.com/embed/flXGZtBwYjE
Problem 5: Dirt tank is full of dust and debris
Solution: Remove the dirt tank and empty it by pushing the bottom lid release button available on the back of the tank.
You can also wash the dirt tank with warm water and a mild detergent. Don’ forget to wear face mask while emptying the dirt bag.
Problem 6: Improper installation of the dirt or upper tank
Solution: Properly install the dirt tank or upper tank. Make sure they are positioned correctly.
Problem 7: The vacuum cleaner is clogged or blocked
Solution: Clearing a clog is necessary to enhance the cleaning performance of your vacuum.
First of all, empty the dirt tank. Then check the upper tank and remove any debris build-up. Also, you need to inspect the suction inlet and remove the clog. Moreover, check the hose wand base, wand, or the hose itself to clean any blockagehttps://www.youtube.com/embed/iAL66_6758M
Problem 8: The rotating floor brush is clogged
Solution: To solve this issue, clean the brush and the brush ends. Also, check the brush cover and clean the accumulated debris under the brush cover.
Problem 9: The bristles of the rotating floor brush are worn
Solution: The only solution is to replace the rotating floor brush.
Your Bissell hardwood floor vacuum may stop sucking due to various reasons. Common reasons include a blocked pet hair eraser, a clogged main hose, a clogged pre-motor filter, a blocked dirt container, or technical problems.
This article lists all the possible reasons why your Bissell hardwood vacuum isn’t sucking dirt from the floor.
Bissell Hardwood Floor Vacuum Won’t Suck – Reasons and Fixes
Cause 1: Clogged Pet Hair Eraser
Some Bissells come with pet erasers. The erasers can get clogged due to debris and hair accumulation. The blockage may cause your Bissell’s suction power to drop partially or completely. Inspect the eraser and brush on the vacuum. You’ll need to replace the roller to restore your vacuum to its full potential. Here’s how you can do it.
Solution
Place or rest the vacuum on its back.
Release the cover by removing the bottom screws.
Take out the brush from its compartment.
Remove and inspect the belt to ensure that there are no damages.
Take the new brush and secure it to the old belt.
Pinch and hook the strap to the silver motor gear.
Place the replacement brush at the bottom of the vacuum cleaner chamber.
Ensure that the brush caps are in line with their respective slots.
Rotate the new brush or pet hair eraser to align the belt.
Reattach the cover and secure the screws.
Cause 2: Overloaded Dirt Container
An overloaded dirt container is another possible cause of no suction. If the dirt container is full, your vacuum cannot collect more debris or dirt until the container gets empty. You need to inspect your dirt container first. Bissell vacuums usually have a transparent dirt container so you can inspect them by looking at them. The dirt container is located at the front of the vacuum.
Ensuring that the dirt container’s door is properly latched is equally important. The door will not close unless the container is fully assembled and properly closed.
Solution
You have to empty the dirt container to combat this issue. Follow the given steps to clean the dirt container of your Bissell vacuum cleaner.
Press the “Tank Release” button present on the vacuum.
Remove the dirt tank or container.
Push the “Empty” button and release the garbage into a garbage can.
Reinstall or replace the empty dirt container in its place. The snapping sound is the indication that the container is fixed correctly.
Cause 3: Main Hose Is Not Secured
If your Bissell vacuum works properly, you have to tighten its hose. If the vacuum’s hose is loose, it will not suck the debris. So, secure the hose tightly to function the Bissell hardwood floor vacuum properly.
Solution
You do not need any specific tools to troubleshoot this issue. You can tighten your vacuum hose within a minute. In most cases, pushing the hose firmly secures it in its place. Besides this, some Bissell models have specific hose securing methods to follow like a twist’ and snap feature. Ensure that the hose will line up with the correct or corresponding tabs and notches. Turn the hose in a clockwise direction, and you will hear a snapping sound. This sound indicates that the hose is now secured, and you can perform regular cleaning functions.
Cause 4: Clogged Pre-Motor Filters
Pre-motor filters are used to clean the suction air with a vacuum cleaner after the air passes through the filter bag. Pre-motor filters clean air before it enters the vacuum motor. Any clogging in these filters may lead to no suction. So, inspect the motor filter thoroughly if your Bissell vacuum isn’t sucking.
Solution
Take out the dirt cup to check two pre-motor filters.
To clean the foam filter, use warm water and a mild detergent.
Let the foam filter completely dry for at least 24-48 hours. Once the form filter is dry, reinstall it.
Check the white pleated filter. Do not wash this filter; you only have to shake it to remove debris and dirt. Manufacturers recommend not to wash this filter because water can affect its efficiency.
Cause 5: Wrong Vacuum Setting
Some models have variable suction speeds for different types of floors. The problem may be as trivial as a wrong suction setting on your vacuum.
Solution
Check the level at which suction is set if you are experiencing low suction. You can adjust the suction through the handle/controller.
Cause 6: Faulty Motor Duct
Though it happens rarely, it is better to check the motor duct if nothing else works. You can check this by running the machine and feeling suction at the inner motor duct.
Solution
You’ll need to take your vacuum to an authorized Bissell service center. You can also reach Bissell here.
Cause 7: Blocked Extension Wand and Handle
Another common reason most vacuums show poor, or zero suction is a blockage in the extension wand and handles. The blockage usually happens due to not cleaning the wands and hoses regularly.
Solution
You can remove clogs in wands and handles by pushing something flexible with blunt edges through the wand. Make sure you don’t use anything that’s pointy or something that can damage the wand and pipes. A hole or leak in the pipe often requires replacement.
Cause 8: Dirty Filters
All vacuums have filters. Blocked or dirty filters can cause problems like suction drop, overheating, and improper cleaning. The filter cleaning process varies from one model to another. Please refer to your user manual to see how to clean/replace filters on your Bissell.
Solution
The following steps explain how to clean/replace the Bissell PowerEdge® Hard Floor Stick Vacuum filter.
Place your machine on a flat surface.
Remove the dirt cup and grasp the filter assembly by clear plastic tabs to lift it up/out.
Rotate the clear plastic lid to the right to unlock and separate it from the white container by lifting it out.
The filters are attached to the lid; remove them by twisting to the right to unlock them, then pull them apart.
Remove the outer foam filter from the pleated filter. Please note that foam filters can be washed, but you can’t wash a pleated filter.
Wash the foam filter with warm water. Gently squeeze to wring excess water and let it air-dry completely before returning it.
Check the pre-motor mesh filter at the motor duct; clean it with warm water and detergent. Let the filter air-dry before inserting it back.
Check for the suction at the motor end by placing your hand over the motor duct. Contact Bissell if there is no suction.
Frequently Asked Questions
How to Troubleshoot Bissell CrossWave Cleaner that doesn’t have Suction?
Plug in the machine and press the “Hard Floor” button.
Grab the front handle and press the silver release button to remove the dirty water tank.
Feel for suction strength at the motor vents. Contact Bissell if there is no suction. Continue troubleshooting if you feel suction.
Hold the dirt water tank, grasp, and pull the top from both sides to remove the top.
Remove the filter.
Wash the filter, screen, and float with warm water. Move the float up and down to ensure it moves freely and without friction.
Let the filter dry and replace it; check that the edges are smooth and not folded.
Check the water tank to inspect the rubber gasket around the top of the container. Replace it if it is missing or broken.
Reattach the tank after everything is clean and dry.
Make sure you hear a snapping sound when reinstalling the tank.
Turn on the machine and test for suction.
Unplug the machine if there is no suction.
Remove the water tank brush window and recline the machine.
Remove/clear any clogs in the debris channel of the foot. You’ll need a pen or straw for this task.
Why is Bissell’s pet vacuum brush not spinning?
Sometimes the brush motor gets stalled; consequently, the vacuum brush doesn’t spin. You can reset it by turning off and unplugging the vacuum cleaner. After a few seconds, plug back the vacuum and turn it on. If the issue persists after resetting, you may need to clean the brush roll. Debris accumulations in the brush role could be another possible cause of not spinning. Remove the brush roll and inspect it for cleaning.
How long do Bissell vacuums last?
Bissell vacuum models can last up to 8 years regardless of the model. A vacuum may last longer than its average lifespan if cared for and maintained properly.
Your Roomba vacuum brush may not spin due to following reasons.
1. Jammed Side Brush Module
A jammed side brush module is a common reason why the Roomba side brush is not spinning. It will be jammed due to hair, dirt debris. It requires periodic cleaning to keep the side brushes clean.
The dust particles, hair, and debris can also block the side brush gearbox. It stops the spinning gears inside the gearbox from transferring power to the side brushes forcing them to spin slowly or halt.
2. Side Brush Motor Problems
The brush motor has moving parts that can dry if not regularly oiled. A dry motor will make noises, and the gears won’t turn properly. Check that your motor is properly oiled, especially if you haven’t lubricated it in a while. Some people have also reported side brush motor failure on older Roombas.
3. Damaged Brush Parts
Another possible reason your Roomba brush is not spinning freely is its damaged parts. Turn on the vacuum and check if the side brush is turning at the appropriate time or not. If the motor doesn’t gain any power, it could be due to a failure in the module.
If the side brush doesn’t spin, but the motor is running, it could be due to the cracks in the yellow part of the side brush. The cracks in the yellow part hinder it from spinning freely. If you find cracks or see this yellow part is worn out, it’s better to replace it.
Dirt mainly accumulates underneath the side brush. You have to remove debris that is hindering the movement of the brush. Take a small screwdriver to remove the side brush from your Roomba vacuum. After removing the brush, you will have to clean it thoroughly. You can use a clean cloth or a pointed object to clean the brush.
After cleaning, reinstall the side brush to its place. Now check if the brush is spinning freely or not. If it still doesn’t spin, you have to replace or repair it. To fix this issue, you should check the gearbox also.https://www.youtube.com/embed/jR_4vDZR-tQ
2. Clear The Gearbox From Dirt
Remove the back cover to access the gearbox of your vacuum cleaner and unscrew the side brush. Remove screws holding the back cover to its place. Unscrew the tow screws holding the side brush module.
Unscrew the cover of the gearbox with a screwdriver. Remove each gear one by one and inspect it thoroughly. The gunk buildup on the gears prevents them from moving. Remove any dirt, hair, and other accumulations on these gears.
Lubricate the gears before putting them back.
3. Apply Lubrication to The Side Brush Motor
Lubricate your Roomba side brush motor for its smooth running. Apply some oil on the motor shaft.
4. Check Wires and Connections
Check all wires and connectors if the above fixes don’t work. Replace the side brush motor if if the connections are damaged, loose, or corroded.https://www.youtube.com/embed/fFkinzJw2JA
What does the Roomba side brush do?
The Roomba side brush is used for cleaning the edges to gather debris, dirt, and hair. The side brush spins and collects the debris in its way. Then it places it in front of Roomba’s suction path. Without a side brush, your Roomba will not reach the corners and edges for cleaning the floor.
Will Roomba work without a side brush?
Roomba without side brushes will not work as efficiently as it should. Side brushes help clean the edges and corners. Thus, if you run a Roomba without a side brush, it will not perform its cleaning duties up to the mark. It will be a sweeper, not a vacuum without brushes.
How to clean the side spinning brush of Roomba?
Unscrew the side brush with a screwdriver.
Pull off the brush and remove hair and dirt accumulated over it.
Use a pointed object or a soft brush for cleaning.
