The most horrible part of toilet cleanup is removing the ring from the toilet bowl. The worst thing about toilet bowl rings is that they keep coming back unless you take care of the cause.
In this article, we will discuss all the methods you can use to remove toilet bowl rings.
7 Methods to Remove Ring from Toilet Bowl
Splash Foam Cleaner – Remove Toilet Ring without Scrubbing
Splash foam cleaner is a convenient and effective way to remove toilet rings without scrubbing. The powder-based cleaner is water activated and requires 20-30 minutes to clean toilet rings.
The cleaning process is simple. You pour the powder into the toilet bowl, it starts to fizz, and you let it sit for 20 minutes. Then flush the toilet to reveal a clean and ring-free toilet.
Please note that you may need to repeat the process depending on how dirty the toilet bowl is and how stubborn the ring is.
Splash may fail to show results if the toilet has not been used for a long time. Similarly, stubborn hard water stains may need some scrubbing pre-application. Click the link to read the use of diet coke to clean a toilet bowl.
Baking Soda & Vinegar
Baking soda and vinegar can easily remove the black ring in the toilet bowl. Here are the steps you need to follow.
- Add 1-2 cups distilled white vinegar into the toilet bowl and dissolve it with a toilet brush .
- Add a cup of baking soda after a couple of minutes, followed by 2 cups vinegar.
- The mixture will fizz and make bubbles in the toilet bowl. Let it sit for 20 minutes.
- Grab your brush and scrub the toilet, giving special attention to the ring and area under the rim.
- Let the solution sit for 30 minutes. See if the ring has dissolved. If not, scrub again.
- Flush the toilet.
- Repeat the process if needed.
Toilet cleaners are another convenient and quick way to remove all types of bowl rings. Here are a few cleaners you can use to clean a dirty toilet.
Clorox Toilet Wand Disposable Cleaning System :This cleaner is an all-in-one cleaning solution. It comes with a cleaning brush, 16 pre-loaded scrub pads, and a caddy for easy transfer and mess-free storage.
You scrub the toilet with the pre-loaded scrubbing pads attached to the cleaning wand. The chemical in the cleaner removes the bowl rings and delivers spotless cleaning. It also disinfects the toilet to keep mold and bacteria away from the toilet.
Lysol Toilet Bowl Cleaner with Lime and Rust Remover :Lysol’s cleaner is a specialist lime and rust ring remover. It is best for homes with hard water. You will need a cleaning brush to work with this cleaner.
Better Life Natural Toilet Bowl Cleaner :Better Life is a natural and eco-friendly toilet cleaner that can remove toilet molds and rings. It is best for homes with septic tanks.
Important: Commercial cleaners can be hazardous. Please take precautions like hand gloves, face masks, and safety goggles while working with them.
Bleach is a powerful mold killer. It is corrosive and must be handled with care. Make sure you don’t pour bleach into the toilet tank. Its corrosiveness damages tank seals and plastic parts inside.
Here’s how you can use bleach to remove mold rings in the toilet bowl.
- Flush the toilet bowl to fill it with clean water and pour a bucket of water to push the water level down.
- Scrub the ring with a toilet brush. This will loosen the mold.
- Add one cup of bleach and let it sit for 1-2 hours. Now scrub again with a focus on mold and rim.
- Flush the toilet. Repeat the process if needed.
Borax & Vinegar
Here’s how you can use borax and vinegar to remove toilet bowl rings.
- Flush the toilet and sprinkle ¼ cup of borax into the toilet bowl.
- Dissolve it in water using your toilet brush.
- Add 1 cup of distilled white vinegar into the toilet bowl and mix it using a toilet brush.
- Let the mixture sit for half an hour.
- Scrub vigorously to remove stains and circles from the toilet bowl.
- Flush and repeat if needed.
Pumice Stone – Removing Hard Water Ring from Toilet Bowl
Pumice stone works when everything else fails. A pumice stone is formed when lava and water mix. It is a lightweight, abrasive stone that removes dead skin cells and surprisingly hard water stains from toilet bowls.
Pumice stone is abrasive and must be used lightly and infrequently. The abrasiveness can damage the ceramic finish, which can degrade your toilet bowl’s overall outlook. It must be employed when other methods fail.
Pumice Toilet Bowl Ring Remover is a convenient and affordable cleaner. It comes with a handle, so you don’t have to take your hands inside the bowl. However, it must not be used without gloves.
RMR-86 Instant Mold and Mildew Stain Remover Spray – Best for all Kinds of Moldy Rings
Bring in RMR 86 if household items and commercial cleaners don’t work. The cleaner comes packed in a spray bottle, and you can apply it directly over the ring or mold on other toilet parts. The good part is that you can use RMR-86 on surfaces such as bathroom floor, shower, kitchen sink, and tiles.
Reasons behind Ring Formulation in the Toilet Bowl
There are several reasons why a ring appears in the toilet bowl. The following are the most common reasons behind ring appearance in the toilet bowl.
Mold & Bacteria: These microscopic entities often inhabit the toilet bowl and tank. Once mold and bacteria are in the toilet bowl, they grow rapidly because of the damp environment, poor light, and lack of ventilation. Mold rings can take black, white, or pink colors.
Hard Water: Hard water is the biggest enemy of your home’s plumbing, appliances, faucets, and toilets. The excess minerals (calcium & magnesium) in hard water deposit in the toilet bowl. The ring appears to be rust in color mostly. It soon turns black due to the presence and growth of iron bacteria.
Why does the Toilet Bowl Ring Keep Coming Back?
Analyze why a ring develops in the toilet after cleaning it. It is understandable if the ring forms due to not using the toilet. However, if it comes back despite regular flushing and cleaning, you must sort out why.
A dirty tank can cause rings in the bowl. The flush water comes from the tank. Bacteria and mold travel in water and grow in the toilet bowl.
Homes with extremely hard water are more susceptible to toilet bowl rings than those with moderately hard or soft water. The minerals in hard water deposit in the bowl, slowly turning into a black ring. Using a water softener for the whole house or toilet can reduce reappearance. You can also use toilet cleaning tablets to counter hard water stains. Iron Out automatic toilet bowl cleaning tablets are great for homes with hard water.
Many people don’t flush after urinating. The sugar in the urine provides a thriving ground for mold to grow and form rings.
Poorly ventilated, humid, and dark toilets are more vulnerable to rings than well-ventilated and regularly washed toilets.
How to get Brown Ring out of Toilet Bowl?
High iron content in water causes brown rings. You can use commercial cleaners or pumice stones to remove brown rings from the toilet. A permanent solution would be to reduce the iron content in water using water treatment plants or point-of-use water filters.
Can I use WD-40 to Remove Toilet Bowl Rings?
Yes. WD-40 is an excellent lime and rust remover. You can spray WD-40 directly on the rings or use a soaked rag to remove the rings. Make sure you use a small amount because the manufacturer recommends not flushing it in the drain.
You can remove toilet mold rings in various ways, most of the work. However, you must identify the cause behind frequent ring formulation and try to eradicate it. Then you can use automatic toilet bowl cleaners to keep your toilet clean.