You must remove the brush from Hoover carpet cleaner to clean it properly. This article discusses how you can remove the brush from a Hoover carpet cleaner in 6 easy steps. It is recommended to keep your cleaner’s user manual with you while removing the brush from Hoover.
Step 1: Turn of the power and remove the power cord.
Step 2: Remove the tanks on your Hoover carpet cleaner and set them aside. Do not set the tanks on furniture.
Step 3: Make sure the handle is in the upright position. Tilt the cleaner back until the handle rests on the floor. This will expose the brush underneath the carpet cleaner.
Step 4: Reach in and behind both ends of the brush assembly. Pull it out gently. If the brush is stuck, apply some force at this step.
Step 5: Clean the brush in the sink with tap water. Remove lint, hair, and other debris with your hands. Do not use any tools or abrasive cloths as they can damage the hair on the brush.
Step 6: To replace the brush, align the plastic posts on the brush with the slots on the machine. Push firmly to lock the brush assembly in its place.
How to Remove Brush from Hoover SpinScrub Carpet Cleaner?
Step 1: Turn off the machine and remove the power cord. Remove both the tanks and set them aside. Make sure you don’t place them on furniture.
Step 2: Lift the bottom of the cleaner to expose the brush. Hold the inner portion of the brush assembly and pull it out slightly. This will reveal four release tabs. You need to press all four tabs at one time to free the brush.
Step 3: You can wash the brush with tap water and remove any debris, hair, or lint. Air-dry the brush. Place it on a towel to avoid water leakage.
Step 4: To put the brush back, align the posts on the brush with the slots on the housing as shown in the image above. Make sure that square posts align with the square holes. Turn the brush rollers slightly to check that it has fitted correctly. Once the brush is aligned, press firmly on the brush assembly until it snaps into its place.